Infrared Tunnel Baking Furnace

Function: The equipment is suitable for drying after printing ink on composite board and acrylic surface.

Equipment specifications and main technical indicators.
1. Use beige Teflon cloth conveyor net, net width 600mm
2. Automatic deviation correction is used to prevent deviation of the conveying net.
3. Adopt frequency converter to freely adjust the stepless speed, the speed range is 0.5-5m/min.
4. High-grade fully enclosed gear reducer motor drive.
5. Three-layer independent conveying mechanism, back-and-forth conveying.

Blanking method between layers
1. Use the roller pallet to cut the material, the third layer of material comes out and enters the blanking roller to the pallet, the pallet returns the product to the second layer for baking, and the second layer of material comes out into the blanking roller to the pallet , The pallet is returned and the product falls into the first layer for baking.

Structure distribution
1. External dimensions: L9000mm×W1500mm×H2150mm
2. Feeding section: 1500mm
3. Heating section: 5000mm (Equally divided into 3 sections, 3 layers of heating sections total 15000mm)
4. Cooling section: 500mm
5. Discharge section: 500mm
6. Material transfer layer: 1500mm
7. The conveyor net is above the ground: 1000mm

Furnace body material:
1. The exterior is made of steel plate with high temperature paint after anti-rust treatment, and the sheet metal sealing plate around the base
2. SUS201#1.5t mirror stainless steel plate is used inside.

protective device:
1. In addition to the main temperature control and the upper and lower limit over temperature prevention circuit, the over temperature protection is also equipped with a secondary temperature control
The over-temperature preventer is the safest temperature protector. When the over-temperature temperature is abnormal, the alarm will sound and the power will be automatically cut off.
Source system to prevent accidents.
2. The drive motor is equipped with reverse phase protection to prevent the motor from being too high after reverse phase, causing product defects and equipment damage.
3. Equipped with an emergency stop switch, each heating section circuit overcurrent, overload protection and interlocking.
4. When an abnormality occurs, the abnormal indicator and buzzer alarm are used to facilitate the operator to eliminate the abnormality.

DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd. was established in 2016. The chief engineer and technical backbone of the company have 8-13 years of industry experience, and have made certain achievements in the semiconductor, aerospace, electronics and other industries. The company has served more than 12,800 companies since its establishment. +, The main equipment at this stage are: UV LED curing machine (system), UV ultraviolet curing machine, infrared (IR) tunnel oven, spraying equipment, industrial precision oven, vacuum oven, screen printing

machine, etc. Used in semiconductors, aerospace, new energy vehicle battery modules, new chemical composite materials, liquid crystals, mobile phone panel bonding, glue bonding, screen printing inks, precision electronics, optical communications, polymer chemical materials, medical industry, furniture wood, printing Inkjet, etc. In July 2019, the chief technical engineer of the company and the academician of the International

Optoelectronics Research Institute jointly developed a complete set of UV curing equipment suitable for semiconductor applications. Designed for reliability, designed for efficiency, and manufactured for durability, we are committed to developing more advanced UV curing systems, providing more cost-effective products, better technical guidance, and better after-sales service.