High-Power Conveyor Belt UV Curing Equipment

Scope of application: UV UV ink curing, UV UV glue curing, UV varnish curing and UV coating, UV roll coating, UV varnishing for wood floors, wooden doors, furniture, UV curing and drying, or use alone.

Performance characteristics: wide format, strong load capacity, practical.
UV lamp layout: the top lamp double lamp lamp layout;
Adjustment of UV lamp: adjust the height and angle of each lamp individually;
The UV lamp adopts the condensing design, and the curing is even;
Forced air cooling to ensure proper temperature in the UV room;
The replacement of the UV lamp adopts a closed door device, which is easy to maintain.

technical parameter:
Power requirements: single-phase three-wire 220VAC (power frequency AC) 50HZ (hertz)
Whole machine power: about 2.3KW (kilowatt)
Dimensions: 1330 L (length) × 520W (width) × 1240H (height) mm
Conveying speed: 0-30 m/min (m/min)
Conveying width: 300mm (mm)
Mesh belt material: Teflon high temperature resistant mesh belt, matching unpowered roller
Cooling method: forced air cooling
Light source type: high-pressure Hg mercury lamp
Light wire power: 80w/cm
Light source configuration: 1KW *2.
Tube length: 400MM
Light source life: According to accelerated equivalent test, the average is greater than 1000 (h) hours, and the light attenuation is not less than 80%.
Main peak wavelength: 365nm (nm)
Typical features: aluminum reflector, multi-angle curing, suitable for products with a certain thickness
Typical application: UV curing of furniture paint, UV varnish curing, suitable for non-explosion-proof environment.

Application examples: ink for mobile phone shells, UV glue curing, etc.

DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd. was established in 2016. The chief engineer and technical backbone of the company have 8-13 years of industry experience, and have made certain achievements in the semiconductor, aerospace, electronics and other industries. The company has served more than 12,800 companies since its establishment. +, The main equipment at this stage are: UV LED curing machine (system), UV ultraviolet curing machine, infrared (IR) tunnel oven, spraying equipment, industrial precision oven, vacuum oven, screen printing

machine, etc. Used in semiconductors, aerospace, new energy vehicle battery modules, new chemical composite materials, liquid crystals, mobile phone panel bonding, glue bonding, screen printing inks, precision electronics, optical communications, polymer chemical materials, medical industry, furniture wood, printing Inkjet, etc. In July 2019, the chief technical engineer of the company and the academician of the International

Optoelectronics Research Institute jointly developed a complete set of UV curing equipment suitable for semiconductor applications. Designed for reliability, designed for efficiency, and manufactured for durability, we are committed to developing more advanced UV curing systems, providing more cost-effective products, better technical guidance, and better after-sales service.